High Pressure Mill and Raymond Mill distinction between these two major differences?

High Pressure Suspension Mill:

      High Pressure Suspension Grinder for grinding machine barite, limestone, ceramics, and slag Mo’s hardness of not more than 9.3, humidity below 6% of non-inflammable mines, metallurgy, chemical and building materials industries variety of materials, 280 high fine milling machining, finished in size 80 -- 425 head of the regulator (the smallest 1,000 head). High pressure hanging roller mill can add special equipment to produce a 30-80 Classifier. Principle hypertension hanging roller mill mainframe, roll grinding hanger on fastening a 1000-1500 kg pressure hyperbaric spring.

 

After beginning work, grinding spindle rotary roll around, and high-pressure centrifugal force and the role of spring, keep grinding ring rolling, rolling over the same pressure under dynamic conditions Raimundo powder machine 1.2 times the yield is much higher. When the mill was grinding materials into the cavity, the shovel blade into the Roller Mill Central and between RCC, RCC after the powder with the blower into the cycle of wind machine, qualified with the powder-gas inflow whirlwind of powder which is finished, the charged particles tablets to regrinding. Wind circulating blower to repeat the above process, I entered the Wind bag filter purification.

 

When the roll grinding and grinding up to a certain ring wear, high-pressure adjustment spring length, and to maintain Roller roller mill Central constant pressure. To guarantee stable production and fineness. 
      High Pressure Suspension Mill, Chief Engineer of the company I wear equipment experts Bai Yinghui, in the years engaged in high fine milling machining on the basis of experience, engaged in the development of new milling equipment, thus creating international industrial mills efficient, low-power era.

1. Compared with other mill under the same conditions and power output of 10-20%, Roller roller pressure of materials under high pressure spring of 800-1200kg.
Two Mohs hardness of less than 9.3 processing of mineral materials can be crushed.
3, finished a wide range of particle size, particle size of the rough up to 0.613 mm (30 heads), the general size up to 0.033 mm (425 head), a small portion of the fine material can be reached 0.013 mm (1,000 head).
4, the effect of dust dust emissions completely meet the state standards.
5, analysis adjusted for convenience.
6, ground installations overlapping multi-sealing, sealing performance.
 
       Raymond Mill powder machine:
      Raymond Mill powder machine applies to mining, building materials, chemical, and metallurgical industries, the limestone, calcite, barite, dolomite, K-feldspar, marble, talc, gypsum, kaolin, bentonite, phosphate rock, Manganese ore, iron ore, glass, ceramics, activated carbon, carbon black, refractories, insulation materials, chemical raw materials and hardness of Mo’s not more than seven, humidity below 6% of the more than 300 non-inflammable materials processing mills, refined grain size can be adjusted between 30-325 head (the smallest 600 head). 

     Raymond Mill powder machine processing of materials - to enter the mainframe room after grinding, as the spindle rotation, the centrifugal force, Roll out swinging, press mill in Central, shovel blade materials will be sent to the Roller Mill and Central, with the rolling mill roll achieve grinding, crushing purpose. After grinding material, powder blower with a circulation of wind machine sorting, fine through coarse material charged back-room grinding mill, qualified powder into the air with a powder-Tornado, from the extraction of which is finished. Set the air through the whirlwind of powder and then into a closed circulation blower, so that machines for normal work. I wind through the duct precipitator I purified from the machine outside.