1. Into the hopper

Into a hopper for the structure of the inverted Lingyi (or cylinder CARICOM), I feed wearable ring settings, feeding equipment from the tariff access to the hopperstone crusher (on the price picture).

2. Points Feeder

Feeder points installed in the whirl of the broken upper chamber, the feeder is the role of a tariff will be diverted to the hopper, so that part of materials through the center of the cylinder direct access to the impeller gradually accelerated to high speed projectile out, Another part of materials from the centre to the outside of the cylinder, bypass broken into the whirl of lateral cavity impeller, the impeller was from the high-speed projectile by the crushing impact of materials, not to increase power consumption and increase production capacity, improve the broken efficiency.

3. Whirl crushing chamber

Whirl crushing chamber shape for the structure of the upper and lower cylinder composed of two annular space, in the whirl broken impeller cavity high-speed rotation, whirl cavity can be broken presence materials, a lining material, materials broken in the process whirl broken cavity, the lining material will be broken by the whirl of broken wall separated so that the role is limited to broken between materials, wear-resistant played the role of the lining. Observation is the observation of the rotation hole, I launched the wearable pieces of wear and tear and whirl crushing chamber top liner wear, stone crusher (on the price picture) hours of work must be strictly observed clearance holes sealed. Feeder fixed points in the whirl of the broken upper chamber of the cylinder. High-speed rotation of the impeller flow, in the whirl broken cavity through a feeder, internal impeller formed since the circulatory system.

4. Impeller

Impeller structure from the production of a special material hollow cylinder assembly installed in the top-axis spindle head with conical kits and keyless connection button transmission distance, high-speed rotating impeller HX vertical impact is a crucial component of stone crusher. Impeller materials from the center of the feeder feeding tube entered the center of the impeller. Impeller Centre from fabrics Cone uniform materials will be distributed to the various impeller flow launch, the launch exports flow, the installation made of a special material wearable pieces can be replaced. Impeller materials will be accelerated to 60-75 m / s velocity projectile out, the impact to whirl broken cavity lining materials, the strong crush, and the wear conical hats with the block between, indecent Road board, Impeller protection from wear.

5. Spindle assembly

Spindle assembly installed in the base to transfer motor came through the triangular belt and the driving force supporting the impeller rotational movement. Spindle assembly from the housings, spindle, bearings and other components.

6. Base

Whirl crushing chamber, and spindle assembly, the motor, transmission devices were installed in the end get, the base structure shape, the central space for four Prism, Prism four space at the centre for the installation of spindle assembly, formed on both sides of nesting channel. Dual-motor installed in the base of vertical ends, the base can be installed in the stent, can be installed directly on the foundation.

7. Gear

A single-or dual-motor drive motor belt drive mechanism (more than 75 KW for the dual-motor drive), two dual-motor drive spindle motors were installed in the assembly on both sides, two-motor pulley spindle with a belt and pulley attached to the spindle on both sides of the balance of power, no additional torque.

8. Stent

According to the workplace different stone crusher - outdoor or indoor operation operations, configuration can be considered stent or configuration stent.

9. Lubrication system

Mobil grease used car super centralized lubrication, lubrication spindle assembly site for the upper and lower bearings bearing two, in order to facilitate the oiling, using lateral pipeline diverted to the machines for regular fuel pumps.